DIN ISO EN Standard Parts

SCREWS                                                                           Click on the highlighted link to see the detailed drawing

DIN 964

Slotted oval head machine screws
DIN 966

Cross-recessed oval head machine screws
DIN EN ISO 2010

Countersunk slotted raised head screws
DIN EN ISO 7047

Cross-recessed fillister head screw (standard head) product grade A
DIN 963

Slotted flat head machine screws
DIN 7991

Hexagon socket countersunk head cap screw
DIN EN ISO 2009

Slotted countersunk flat head screws (common head style)
DIN EN ISO 7046-1

Countersunk screw with cross recess (standard head), product grade A
DIN EN ISO 7046-2 Countersunk screw with cross recess (standard head), product grade A- Part 2: steel
DIN EN ISO 1580

Slotted pan head screws
ISO 7380

Button head socket
DIN EN ISO 7045

Pan head screws with cross recess
DIN 561

Hexagon head screw with fine thread; long dog point
DIN 933

Hexagon cap screws fully threaded
DIN 564

Hexagon set screw with small hexagon, half dog point and flat cone point
DIN 6921

Hexagon flange bolts
DIN 6922

Hexagon head screw with flange and reduced shank
DIN 7964

Reduced shank bolts and screws with coarse thread
DIN 931

Hexagon cap screws partially threaded
DIN EN 24014

Hexagon head bolts; product grades A, B
DIN EN 24017

Hexagon head screw; product grades A and B (ISO 4017)
DIN EN 24018

Hexagon head screw; product grades C (ISO 4018:1988)
DIN EN 28676

Hexagon head screws with metric fine pitch thread
DIN EN 28765

Hexagon head bolts with metric fine pitch thread
DIN 835

Gudgeon; inserted end approx. 2d
DIN 938

Gudgeon; inserted end approx. 1d
DIN 939

Gudgeon; inserted end approx. 1.25d
DIN 940

Gudgeon; inserted end approx. 2.5d
DIN 7604

Light-duty hexagon head screw plugs
DIN 908

Hexagon socket screw plugs
DIN 427

Slotted headless screw with chamfered end
DIN 6912

Hexagon socket thin head cap screws
DIN 7984

Hexagon socket thin head screw
DIN 912

Hexagon socket head screw
DIN EN ISO 1207

Slotted cheese head screws
DIN 603

Mushroom head square neck bolt
DIN 2510

Bolted connections with reduced shank
DIN 975

Threaded rod
DIN 7337

Flat head sealed blind rivets

PINS/BOLTS

DIN 1444

Clevis pins with head
DIN EN 22340

Clevis pins without head - Type A; without split pin holes
DIN EN 22341

Clevis pins with head - Type A; without split pin holes
DIN 6325

Parallel pins hardened
DIN 7

Stainless steel dowel pin
DIN EN 22338

Parallel pins, of unhardened steel and austenitic stainless steel
DIN EN 28734

Dowel pins
DIN 417

Slotted set screws with dog point
DIN 551

Slotted set screws with flat point
DIN 553

Slotted set screws with cone point
DIN 913

Flat point hexagon socket set screw
DIN 914

Hexagon socket set screw with cone point
DIN 915

Dog point hexagon socket set screw
DIN 916

Cup point hexagon socket set screw
DIN 926

Slotted set screws with dog point
DIN EN 24766

Slotted set screws with flat point
DIN EN 27434

Slotted set screws with cone point
DIN EN 27435

Slotted set screws with long dog point
DIN 7346

Spring-type straight pins slotted, light duty
DIN EN 28752

Spring-type straight pins slotted, heavy duty
DIN EN 22339

Unhardened taper pins

NUTS

DIN 935-1

Castle nut, metric coarse and fine pitch threads; product grades A and B
DIN 935-2

Castle nut, metric coarse and fine pitch threads; product grades A and B (with new width across flats according to ISO 272 standard)
DIN 935-3

Castle nut, metric fine pitch thread; product grades C
DIN 979

Hexagon thin castle nuts
DIN 1804

Slotted round nuts
DIN 439

Hexagon thin nuts
DIN 934

Hexagon nut, metric coarse and fine pitch thread; product grades A and B
DIN 985

Prevailing torque type hexagon thin nut with non-metallic insert
DIN EN 24032

Hexagon nuts; type 1; product grades A and B (ISO 4032:1986)
DIN EN 24035

Hexagon thin nut (chamfered); product grades A and B (ISO 4035:1986)
DIN EN 24036

Hexagon thin nut (unchamfered) ; product grade B (ISO 4036:1979)
DIN EN 28673

Hexagon nut, type 1, with metric fine pitch thread; product grades A and B
DIN EN 28674

Hexagon nut, type 2 with metric fine pitch thread; product grades A and B
DIN EN 28675

Thin hexagon nut with metric fine pitch thread; product grades A and B
DIN 986

Self locking domed cap nuts with nylon insert
DIN 1587

Hexagon domed cap nuts
WASHERS
DIN 127

Spring washer - Normal series
DIN 125-1

Washer (without internal chamfer); product grade A
DIN 125-2

Washer (with internal chamfer); product grade A
DIN 126

Washer; product grade C
DIN 433-1

Washer; product grade A; till hardness 250 HV; preferred for head cap screws
DIN 433-2

Washer; product grade A; till hardness 300 HV; preferred for head cap screws
DIN 9021

Large size washer; product grades A and C

CIRCLIPS

DIN 988

Shim and supporting rings
DIN 471-1

Circlips (retaining rings) for shafts - Normal type
DIN 471-2

Groove for circlip for shafts
DIN 472-1

Circlips (retaining rings) for bores - Normal type
DIN 472-2

Groove for circlip for bores
DIN 6885-1

Drive Type Fastenings without Taper Action; Parallel Keys, Keyways, Deep Pattern (feather)
DIN 6885-2

Drive Type Fastenings without Taper Action; Parallel Keys, Keyways, Deep Pattern for Machine Tools (feather)
DIN 6885-3

Drive Type Fastenings without Taper Action; Parallel Keys, Shallow Pattern (feather)

DIN 6885-4

Drive Type Fastenings without Taper Action; Parallel Keys, Keyways, Deep Pattern (keyseat)
DIN 6885-5

Drive Type Fastenings without Taper Action; Parallel Keys, Keyways, Deep Pattern for Machine Tools (keyseat)
DIN 6885-6

Drive Type Fastenings without Taper Action; Parallel Keys, Shallow Pattern (keyseat)
DIN 6799-1

Lock washers (retaining washers) for shafts
DIN 6799-2

Keyseat for circlip DIN 6799
DIN 705

Stop rings
DIN 94

Split pins
SPRINGS
DIN 2093

Spring washer
DIN 2098

Helical springs made of round wire
HOLES
DIN EN 20273

Fasteners, clearance holes for bolts and screws
DIN 74-1

Countersinks for countersunk head screws
DIN 74-2

Counterbores for hexagon socket head cap screws and slotted cheese head screws
DIN 13

ISO metric screw threads; 1 mm to 300 mm diameter coarse and fine pitch threads
DIN 13-76

 
DIN 76-1

Thread run-outs and thread undercuts for ISO metric threads in accordance with DIN13-1
DIN 76-2

Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1
PLAIN BEARINGS
DIN 1850-1

Bush for copper alloy plain bearings, solid
DIN 1850-3

Plain bearings Sintered bushes
DIN 1850-4

Bush for artificial carbon plain bearings
DIN 1850-5

Bush for duroplastic plain bearings
DIN 1850-6

Bush for plain bearing , thermo-plastic press-fit bush
DIN 1494-1

Plain bearings Wrapped bushes for plain bearings
ROLLING BEARINGS
DIN 625-1

Radial deep groove ball bearings, single row
DIN 625-3

Radial deep groove ball bearings, double row
DIN 625-4

Radial contact groove ball bearings with flanged outer ring
DIN 5412-1

Cylindrical roller bearings, single row, with cage
DIN 5412-4

Cylindrical roller bearings, double row, with cage, increased accuracy
DIN 5412-9

Rolling bearings; cylindrical roller bearings, double row, full type roller bearings, non separable; dimension series 48 and 49
DIN 628-1

Angular contact radial ball bearings, single row
DIN 628-3

Angular contact ball bearings, double row, with cage
DIN 628-4

Angular contact radial ball bearings, single row, fourpoint contact bearing
FITTINGS
DIN 2982-1

Threaded steel fitting; barrel nipple, taper nipple
DIN 2982-2

Threaded steel fitting; double nipple
SEALS
DIN 7603-1

Packing ring
DIN 7603-2

Packing ring
PROFILES
DIN 59410

FRR, FRR2, FRQ and FRQ2 Hollow section hot formed square and rectangular steel
DIN 59411

FRR, FRR2, FRQ and FRQ2 Hollow section cold formed welded square and rectangular
DIN 59413 Sigma

Cold rolled steel sections; Sigma- form
DIN 59413 Omega

Cold rolled steel sections; Omega- form
DIN 59413 C

Cold rolled steel sections; C- form
DIN 59413 Z

Cold rolled steel sections; Z- form
DIN 1771

Sections made of aluminum; Pressed
DIN 9713

Channel section, made of aluminum and wrought aluminum alloys; Extruded
DIN 9714

T section, made of aluminum and wrought aluminum alloys; Pressed
DIN 1025-1

Hot rolled I-beams narrow flange I-beams, I-serie
DIN 1025-2

Hot rolled I-beams narrow flange I-beams, IPB-serie
DIN 1025-3

Hot rolled I-beams wide flange I-beams, light pattern, IPBI-serie
DIN 1025-4

Hot rolled I-beams wide flange I-beams, heavy pattern, IPBv-serie
DIN 1025-5

Hot rolled I-beams medium flange I-beams, IPE-serie
DIN 1026

UPE hot rolled channels
DIN 1027

Z Bar; hot rolled round edge Z